China CCC Certification


The CCC mark is mandatory for products listed in China's compulsory product catalogue. Our engineers work from your CB report and manage the application end to end, coordinating the in-country testing and the factory inspection with our partner labs.

  • A2LA accredited pre-compliance testing: our ISO/IEC 17025 scope covers IEC 62368-1, IEC 60335-1, IEC 61010-1 and IEC 60601-1, so design problems surface in Aurora before they reach a Chinese lab.
  • GB 9706.1:2020 on our scope: the Chinese national standard for medical electrical equipment, tested in Aurora rather than shipped out.
  • Engineers who work with CB reports: an IECEE CB certificate and report is accepted toward a CCC application. We read what you have, and place new CB testing with our partner labs.
  • One point of contact: sample submission, the Chinese language document set and the factory inspection schedule handled together.
How CCC certification works

What is China Compulsory Certification (CCC)?

China Compulsory Certification CCC mark

China Compulsory Certification, shown on product as the CCC mark, is a mandatory approval for any product named in China’s compulsory product catalogue. A listed product cannot legally be imported, sold or used in mainland China without it. The scheme took effect on 1 May 2002 and became fully mandatory on 1 August 2003.

The programme is administered by the Certification and Accreditation Administration of China (CNCA). The certificates themselves are issued by designated Chinese certification bodies, most commonly CQC and CVC. A foreign manufacturer applies through one of those bodies. You can check an existing certificate against the CQC certificate inquiry database.

Which products need CCC certification?

Scope is decided by catalogue category, not by product type in the general sense. If your product falls inside a listed category, CCC applies. Categories that come up most often in our work:

  • Information technology equipment: computers, servers, displays, printers and their power supplies.
  • Audio and video apparatus: covered by the same IEC 62368-1 family we test to under our A2LA scope.
  • Household and similar electrical appliances: the IEC 60335 series, including the particular standards for each appliance type.
  • Low voltage electrical apparatus, switches and protective devices: circuit breakers, connection devices and installation protective gear.
  • Lighting apparatus, electric tools and small power motors.
  • Medical devices: where GB 9706.1 applies, which is on our accreditation.

The catalogue is revised periodically and categories move on and off it, so confirm the current listing for your exact product before you budget for the work. Send us the model and its intended function and we will tell you which category it lands in.

Is CCC the same as CE?

No, and the difference is the part that catches exporters out.

CE marking for most product categories is a self declaration. You compile a technical file, sign the declaration of conformity, and apply the mark yourself. No outside body has to approve it.

CCC is third party from end to end. A Chinese certification body reviews your file, your samples are tested in China, and your factory is inspected before the certificate is issued. A CE file is a useful starting point because much of the underlying IEC testing overlaps, but it is not a substitute and it does not shorten the factory inspection.

How does the CCC certification process work?

Six stages, in order:

  • Application submission: filed with a designated body such as CQC or CVC.
  • Document review: Chinese language manual, technical drawings, product specification and the critical component list.
  • Sample testing: carried out in China against the applicable GB standards.
  • Factory inspection: an on site audit of your production and quality controls.
  • Report and certificate review.
  • Issue of the CCC certificate.

Critical components have to be IEC or CCC approved in their own right, which is where a project usually slips. A single uncertified power supply or switch inside the enclosure will hold up the whole file.

Is CCC certification hard to get?

The testing is rarely the hard part. If your product already meets the relevant IEC standard, the GB version is usually close enough that the results carry across with limited extra work.

Two things stretch the timeline. The first is the factory inspection, which has no equivalent in CE or FCC work and takes preparation your team may not have done before. The second is the document set, which has to be in Chinese and has to match the samples exactly. Mismatches between the manual, the nameplate and the tested sample are the most common reason a file goes back for revision.

How Megalab supports your CCC application

Our engineers work from your CB report and manage the certification through to the certificate. For CCC that breaks into three parts.

  • Pre-compliance testing on our own ISO/IEC 17025 scope: IEC 62368-1, IEC 60950-1, IEC 60065-1, the IEC 60335 series, IEC 60730, IEC 61010-1 and IEC 60601-1. These are the standards the GB versions are derived from, so a failure found in Aurora is one you are not paying to discover in China.
  • GB 9706.1:2020 is on our accreditation for medical electrical equipment, along with GB 9706.1-2007 and GB 9706.15-2008. Chinese national standard testing, done here.
  • We project manage the CB work: an IECEE CB certificate and report is accepted toward a CCC application. Our engineers read the report you already hold, identify what the Chinese body will still ask for, and place any new CB testing with our partner CB labs, managing that work rather than handing you a referral.

Sample testing for the certificate takes place in China and the certificate is issued by the Chinese body. What you get from us is a single point of contact across the CB lab, the Chinese certification body and the factory inspection, instead of running three relationships yourself, and an engineer who stays on the application until the certificate issues.

Working across several markets at once? See our global market access overview, or the sibling pages for China CQC voluntary certification and China SRRC radio type approval, which is the one you also need if your product transmits.

What our clients say

4.8
Neil Y. profile picture
Neil Y.
8 months ago
Working with MegaLab has been an outstanding experience from start to finish. Garry, Vik, Sreyas, and Alex are a fantastic team — knowledgeable, responsive, and genuinely easy to work with. Turnaround times have consistently been faster than expected, and the level of technical expertise they bring to every project gives us full confidence in the results. Communication is seamless, and it's clear they take the partnership seriously. If you're looking for a reliable, professional lab you can count on, MegaLab is the real deal — highly recommend!
Ada L. profile picture
Ada L.
2 years ago
Megalabs supported us extensively with testing as we prepared for the FDA submission of our first medical device. Their team is composed of some of the most dedicated and detail-oriented professionals I’ve had the pleasure of working with—especially Vik, Brooke, Sreyas, Solomon, Famous, and Marty. They generously gave us a tour of their facilities and were always willing to take calls and attend meetings, even across different time zones. I’m incredibly grateful for their support—they truly went above and beyond.
We had a fantastic experience working with Megalab on our IEC 60601 testing. Their technical knowledge and attention to detail were clear from day one, and they went above and beyond to keep us on track for our first medical device FDA submission.

The team was easy to communicate with, quick to respond, and truly committed to our success. Marty, Vic , Soliman, and even the accounting team provided us with white glove service. Not to mention that their facility is truly impressive!

We wouldn’t hesitate to work with them again, in fact we are looking forward to it!

Related Global Market Access Services

Other Megalab Testing Services

Let's Start Your Project


Fill out the form below, and one of our lead engineers will contact you within 24 hours to discuss your project.

Contact Information

Address

150 Addison Hall Circle,
Aurora, ON, Canada, L4G 3X8

Phone

+1-905-752-1925

Email

info@megalabinc.com

Business Hours

Monday - Friday: 9:00 AM - 5:00 PM

We respond to all inquiries within one business day.

Certifications & Accreditations

> View all Accreditations

Request a Quote

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
(Optional, but helps us respond faster)

Ready to ensure your product meets global compliance standards?

Partner with Megalab for comprehensive testing solutions and expert guidance throughout your compliance journey.


Get Your Free QuoteOr Call Us Today: +1(905)-752-1925
About
A2LA accredited laboratory symbol

Megalab Group Inc. is an ISO 17025 A2LA Accredited Independent Compliance Testing Laboratory located in Aurora, ON, Canada.

>> Learn more about what we do

© 2026 Megalab Group Inc. All rights reserved
View our Privacy Policy + Terms of Service

Top

Privacy Preference Center

Request a Quote